$55.00 - $57.00
The Widefoot CargoMount allows you to securely strap down a wide variety of bottles, smaller bags, and cylindrical objects to your bike frame and fork. Made of sturdy and lightweight aluminum, and available in three finishes, including Silver (Clear Anodized), Black, or Mint. Our unique 7-slot configuration allows you to fine tune your installation at multiple positions on frames and forks with three-bolt mounting systems. Weighing just 68g, it’s among the lightest on the market. Comes with 2 x 15" straps
$3.59 - $7.99
Sunlite's Alloy Cage comes in a rainbow of colors to match your bike. It's light, holds fast and looks great.
• Constructed of impact resistant Nylon • Carry lightweight roundish objects such as insulated Nalgene bottle holders, thermoses, Gatorade jugs, small dry bags, and ultralight sleeping pads and shelters • Mounts to water bottle cage mounts via Salsa’s Three-Pack pattern • Includes two nylon straps • Cargo Weight Limit: 6.6lbs (3kg) • Cage Weight: 149g
$10.00 - $12.00
Shop branded Water Bottle made by Purist! Watergate cap is spill proof. (only availalbe in 26oz, the black cap)
Sometimes you don't want to leave your cup of joe at home. Enter: Portland Design Works' Bar-ista to keep your morning beverage within easy reach. This handy accessory fits most travel mugs and attaches to 26.0mm handlebars. Drop in your travel mug (with a good lid to avoid splash stains) and enjoy the ride. - Constructed of 5052 alloy and lined with rubber to better grip travel mugs - Weight: 71g (2.5 ounces) - Dimensions: 8cm (3.125") diameter at top, tapering to 7.5cm (2.95") at bottom - Lifetime PDWarranty
The Lucky Cat Cage is made from a single sheet of lightweight 5052 alloy. Cut in the shape of a Maneki-neko (Japanese for "beckoning cat"), this Portland Design Works bottle cage will undoubtedly bring good luck to its owner. Its side loading design makes it a great fit on small bike frames.
$4.99 - $7.99
Planet Bike's PB Cage holds your bottle securely with sturdy 6.2mm-diameter 6061-aluminum tubing and comes in a variety of colors so you can coordinate your bike down to the last detail.
$9.99 - $10.00
- Constructed using a 6mm aluminum rod - Embossed MSW logo
$10.99 - $19.99
• Holds bottles securely • Buttons make bottle entry & exit easy • Fits standard 20–24oz water bottles
$11.99 - $14.99
Lezyne's Flow Cage is made from a fiber reinforced Composite Matrix material for low weight, strength, and reliability. Its X-Grip design holds bottles securely over the rough stuff and allows for easy in/out.
Lezyne's Flow Cage SL is made from a fiber reinforced Composite Matrix material for low weight, strength, and reliability. And, it loads from the side for added convenience — especially on compact frames or full suspension bikes! It is available in both left-side and right-side loading configurations.
Durable, fiber reinforced Composite Matrix construction. Optimized side-load shape for easy bottle access in compact frames. Engineered to hold bottles securely. Oval mounting holes allow fine tuning of position on frame. - Weight: 48g
Durable, fiber reinforced Composite Matrix construction. Optimized side-load shape for easy bottle access in compact frames (right side configuration only). Integrated storage container below the cage with CO2 cartridge holders on both sides of the cage. Engineered to hold bottles securely. Oval mounting holes allow fine tuning of position on frame. - Weight: 94g
$5.99 - $7.99
- Rigid alloy construction - Weighs only 65.2 grams
$19.99 - $25.00
Modern mountain bikes' fancy suspension and lower standover height have put water bottle cage real estate at a premium, but Blackburn's Wayside Side Entry MTB Cage buys back some space! - Left or Right Handed - This 2 piece system can be installed so that the bottle is able to exit from either the right or left side. No extra hardware is required and the cage installs easily and quickly. - Bottle Retention - There is nothing worse than looking down at your bike and realizing that you have one less water bottle than you started with. Our cages are vigorously lab AND field tested at each stage of the development process to ensure that your water is safely held to the bike. Details: - Standard 65mm center-to-center hole spacing - Two mounting bolts included Dimensions: - Length 140mm/5.51in - Width 87mm/3.43in - Height 87mm/3.43 - Weight 45 Grams
Optimized for both side and direct bottle entry, Zipp's Alumina cage provides easy access to hydration, especially on smaller bike frames and those with tight angles. Thin-but-strong arms flex for easy bottle insertion and removal, at any angle. - 27 grams
$15.00 - $16.00
Stay hydrated and show your allegiance to speed with Zipp's Water Bottle. They're made by Purist and feature bold Zipp logos so you're always repping.
Zipp's SL Speed Carbon Bottle Cage features an ultra-light (18g) design engineered for flexibility and strength. Optimized for both side and direct bottle entry the SL Speed cage provides easy access to hydration, especially on smaller bike frames and those with tight angles. Thin-but-strong arms flex for easy bottle insertion and removal, at any angle.
Zipp's Vuka Alumina BTA Mount with QuickView is cleverly designed to sit between the arms for aerodynamic efficiency while riding. The 104-gram, rock-solid aluminum mounting frame includes a QuickView quarter-turn mount for all Garmin Edge series head units, and is compatible with Zipp's Vuka BTA Carbon Water Bottle Cage (each sold separately). Mounting hardware is laser etched with a precision alignment scale, allowing wide-range adjustability so you can focus on the road ahead.
Designed and engineered specifically for the Vuka BTA mount, the Zipp Vuka Carbon BTA bottle cage is constructed completely from UD carbon fiber, for low weight and strength, as well as super secure bottle fitment. It's engineered to virtually eliminate bottle launch.
Wind-tunnel testing shows that a bicycle with XLAB's Aero TT Cage and Bottle System on it is 25% more aero than with a round bottle, meaning it will shave up to 20 seconds off a 40K bike leg or time trial. The high grip cage holds the bottle securely, and the non-slip surface with an easy-grip groove makes it easy for you to get the bottle out. The included XLAB 20-ounce aero bottle is BPA-free. - NEW! Stealth black bottle color. Match your black Torpedo Bottle or kit-match your bike! - Carbon cage securely grips bottle - Save up to 64 seconds on Full Race distance - 50% Less Drag than round bottles - Special XLAB Hi-Grip Deep Pocket carbon cage
Replacement Spare Bottle for Aero TT System - BPA free - High grip sides - Aero-weenies rejoice with 50% less drag than round bottles - Ideal 20oz (590ml) capacity for a gel/water mix - Save up to 64 seconds on Full Race distance - 20 oz (590mL)
XLAB's Aqua Shot Calibrated Bottle has helped athletes win world championships and it'll help you perform your best, too. This unique, time-saving racing bottle has a high-flow squeeze valve and 4-ounce gradations so you can gauge your hydration. It's made of taste-free and safe BPA-free polyethylene with a fast-flow silicone valve that seals tight as soon as you stop squeezing. The valve is also not exposed to dust or contamination. This fine bottle is dishwasher top-shelf safe, can be used with carbonated beverages and is even shaped to fit better in bottle cages.
XLAB's Chimp Carbon Cage weighs only 36 grams and firmly holds your bottles in place, even over bumpy terrain thanks to 5 pounds of gripping force. It's specifically designed for use with tri bikes and other aero rigs with smaller front triangles that make grabbing bottles from ordinary cages difficult. The Chimp Cage's 30-degree cutoff lets you pull your bottles out at an angle for improved ease of use. Plus, this light carbon cage grips great and has supportive top and bottom tabs so you'll never lose a bottle.
- High-tech insulated racing bottle keeps liquids cool - Ultra secure groove latches onto XLAB cages to prevent launching - Capacity: 20oz (600ml)
Low-cost nylon composite mount with NEW Italian-made cage. Featuring 60% more grip force than original model! - Single bottle system neatly tucks one bottle behind your saddle for easy access to hydration - Perfect location for an extra bottle when taking on longer training rides or Century rides - Mounts low to not hinder your ability to get on and off the bike - Carry repair kit with XLAB Multi-Strike Repair Holder Ideal for first-time rear hydration system buyers - Ergonomically designed so you can easily access the bottle even with limited flexibility - Low mounting position provides enough clearance to easily swing your leg over the saddle - Adjust bottle height by up to 1" to perfectly position to your comfort level Worry-free bottle security - High-gripping XENON cages tout approx 8lbs (3.6 kg) cage grip force – within the ideal range of rear system grip force for worry-free bottle retention - Strong, sturdy mount prevents swaying, rattling and vibration Easy storage upgrades readily available - Add an XLAB Multi-Strike Repair Holder – a compact storage bracket that sleekly mounts behind the cage! - Multi-Strike Repair Holder easily carries a clincher repair kit – tube, tire levers, XLAB Air Strike CO2 Cartridges and XLAB inflator. It can also carry a full tubular setup including tubular tire and inflating foam sealant.
• AERODYNAMIC LOCATION - Mounts to saddle, hiding in body’s draft • HIGHLY ADJUSTABLE - Can adjust cage angle and cage height for a perfect custom position • STABLE DESIGN - Stiffest mount on market with alloy arms • FLARED CAGE DESIGN - Makes inserting bottle easy • HIGHEST GRIPPING CAGE - 14 lbs grip on bottle to prevent bottle launches • ANTI-VIBRATION - Locking hardware for safety and security • REPAIR STORAGE OPTIONS - Compatible with AERO POUCH 300 BAG or MULTI-STRIKE REPAIR HOLDER (each sold separately) • Aircraft aluminum mount • Carbon fiber bottle cage • Weight: 141.5 grams Why single rear carriers? • Replaces frame bottle: Standard frame-mounted bottles have high aerodynamic drag, so place your bottle at the rear instead. The DELTAs are mounted on the saddle rails for no measurable drag. • Refills front drink system: Use the DELTAs to refill a front drink system. Just bring the spare bottle forward from the DELTA and refill. If you have the popular XLAB TORPEDO aerobar mounted system (sold separately), then simply replace the empty front bottle with the spare bottle from the DELTA. • Adds an extra bottle: These systems are also ideal for longer training rides or century rides, where an extra bottle is necessary so you can have your favorite mix with you at all times.
The Delta 425 is among the lightest and stiffest, adjustable single rear bottle carriers on the market. Compatible with ISM saddles. The Delta 425 mounts to the saddle rails and hides in the body's draft. Angle and height are highly customizable for that perfect fit. It includes a tight-gripping Gorilla XT carbon fiber cage for a secure hold.
XLAB's Gorilla Carbon Cage is one of the most popular rear bottle cages on the market! It boasts an amazing 7-pound grip force to keep bottles in place on bumpy roads and it's been specifically tweaked to work perfectly with saddle-mounted cage carriers. The Gorilla has over two times the gripping force of conventional carbon cages thanks to its 6 carbon gripping fingers, its top and bottom retention tabs and thicker carbon construction. And, it's still easy to slide your bottle out and grab a drink even when you're pushing it to the limit.
XLAB's Gorilla XT Carbon Cage is perfect for mountain bikes, rear-mounted carriers and other high-stress hydration situations. The XT has over 4 times the gripping force of conventional carbon cages thanks to its 6 carbon gripping fingers, its top and bottom retention tabs and thicker carbon construction. And, it's still easy to slide your bottle out and grab a drink even when you're pushing it to the limit. It boasts an amazing 14-pound grip force on bottles.
Page 1 of 5 Next page