Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Packs/Racks/Baskets

Wolf Tooth B-RAD 2-Base Mount
$19.95
B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Single bottle mount with two slotted holes for adjustments up to 4mm +/- 10mm - Designed to maximize bottle capacity on small frame bikes and dual suspension frames
Wolf Tooth B-RAD 3-Base Mount
$22.95
B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Three slots for additional adjustments over the B-RAD 2 base - Compatible with triple bottle mounts on forks or frames, use neoprene pad and zip tie for use with standard bottle cage mounts
Wolf Tooth B-RAD Accessory Strap Mounts
$24.95 - $34.95
The B-RAD Accessory Strap Mount is designed to add an additional strap point for tire levers, tubes or CO2 cartridges. Mounts to bottle bosses, or to the B-RAD base for additional carrying options. - Mounts to bottle bosses, or to the B-Rad base for additional carrying options - Main strap is 50mm wide and holds loads 75-120mm diameter (3 - 4.75 inches) - Cradle strap is 40mm wide and 350mm long for supporting loads
Wolf Tooth Valais Dropper Post Seat Bag Adaptor
$24.95
While the classic seat pack is a great place to store little-used essentials out of the elements, their mounting systems can interfere with and often damage modern dropper seatposts. Valais allows the use of a traditional seatbag on a dropper seatpost. - Allows the usage of seat packs on a dropper post - Protects the dropper stanchion from wear and grit - Can act as a travel limiter when full drop isn't needed - Sized by stanchion diameter
Wald 1372 Front Basket
$39.00 - $39.99
- Made in U.S.A. (Maysville, KY) - Shallow baskets carry notebooks, boxes or other articles that lie flat - Dimensions: 15 x 10 x 4.75 inches; the basket tapers to 13 x 8 inches at the bottom - Extended handlebar clamps fit 7/8" and 1" diameter handlebars, and 1 3/4" apart to offer clearance for shift and brake cables - Baskets have 2-piece legs which extend from 14 inches to 22 inches and mount to either the axle or fork eyelets on bikes with quick release front hubs - 1372 has a Zinc plated finish; 1372GB has a Black Powder Coat Finish - Complete basket with fittings weighs 2.2 lbs.
Wald 215 Rear Rack
$24.99 - $66.99
Wald bicycle racks offer a simple rear rack design for easy use. Lightweight, yet sturdy construction with simple mounting points located at eyelets near the rear axle and the brake mount. The 215 works perfectly with Wald's innovative 582 rear folding basket. - Simple design for easy use - Lightweight, yet sturdy - Steel rack w/adjustable brake bolt mount - Loading surface = 13" x 5" - Lightweight at just over 2 pounds
Topeak Aero Wedge Pack (Large w/Strap)
$34.95
Don't overstuff your jersey pockets. Simplify your load by putting your essentials in Topeak's Aero Wedge Pack. It straps neatly beneath your seat and is constructed of durable 1200-denier, Teflon-coated polyester with reflective strips and a taillight mount for nighttime safety.
Topeak Aero Wedge Pack (Medium w/Strap)
$29.95
Don't overstuff your jersey pockets. Simplify your load by putting your essentials in Topeak's Aero Wedge Pack. It straps neatly beneath your seat and is constructed of durable 1200-denier, Teflon-coated polyester with reflective strips and a taillight mount for nighttime safety.
Topeak Aero Wedge Pack (Small w/Strap)
$25.95
Don't overstuff your jersey pockets. Simplify your load by putting your essentials in Topeak's Aero Wedge Pack. It straps neatly beneath your seat and is constructed of durable 1200-denier, Teflon-coated polyester with reflective strips and a taillight mount for nighttime safety.
Topeak Mounting Bracket Arm
$11.95
For BabySeat II Racks and MTX Tubular Racks (34.5 cm in length for small bike frames). - If you have a small frame bike and cannot install Topeak rack or BabySeat in recommended position (2 or 3 degrees from horizontal), please use the 34.5cm extra long mounting bracket arm for proper installation.
Swift Industries Bandito Bag
$96.00
The Bandito Bicycle Bag is the perfect size for your tools, a windbreaker and your small stuff. It is at home on both your road bike and gravel rig and stays secure with two included Swift Straps and an elastic lash cord. Damn, it’s cute. The Bandito Bicycle Bag is made out of recycled polyester and contains roughly 4 plastic bottles rescued from polluted rivers.
Swift Industries Catalyst Pack
$160.00
The Catalyst Pack is a bomber mid-capacity bicycle bag. Fit to hold six liters worth of stuff, the Catalyst Pack has easily made its way onto our top-seller list as a go-to-gravel-adventure-bag. Riders with less clearance and narrow handlebars now have a stellar option for stowing gear up front and from the saddle. The Catalyst Pack is perfect for gravel adventures, road touring, bikepacking, the daily grind, and even XC-MTB! The Catalyst Pack is made out of recycled polyester and contains roughly 10 plastic bottles rescued from polluted rivers.
Swift Industries Zeitgeist Pack
$200.00
The Zeitgeist Pack is a bonafide bicycle handlebar and saddle bag. Our design puts 12L of carrying capacity right at the helm of your bicycle, features two clever side-pockets and is designed for best-in-class handling. The Zeitgeist Pack is an excellent choice for gravel adventures, touring, bikepacking, and everyday bicycle commuting. The Zeitgeist Pack is made out of recycled polyester and contains roughly 15 plastic bottles rescued from polluted rivers.
Surly 24-Pack Rack
$155.00
If you like to ride useful bikes, racks make a lot of sense. Surly's 24-Pack Rack ups the useable cargo space on your bike, providing more real estate for more stuff: more beer, more food, more random bits from the hardware store, more whatever. It’s manufactured from cromoly tubing and uses stainless steel hardware. And it offers height adjustability, so you can keep your cargo close to the ground and stable. It has plenty of braze-ons, too, so you can customize how you secure your cargo…or just light your bike up like the space station. The 24-Pack Rack attaches to most forks that feature mid-blade and crown eyelets. It gives you a stable, rigid assembly upon which you might place your burden. No one likes a sweaty back and a sore bottom, so take your stuff out of that messenger bag and put it on the front of your bike. The 24-Pack Rack is rated to carry 30lbs (13.6kg) and comes in black or silver.
Surly 8-Pack Rack
$130.00
Most of you don’t need the cargo capacity to land a helicopter on your rack. Sometimes, all you want to do is grab a sixer from the beer store on the way home, or pick up a nice bouquet of flowers. For whatever the situation dictates, Surly offers the 8-Pack Rack. Made from the same tubular cromoly steel as their front and rear touring racks, the 8-Pack Rack is a solid pedestal upon which you may rest a handlebar bag, grocery bag, minaudiere, satchel…or whatever you use to carry your bowling ball around. The 8-Pack Rack attaches to most forks with mid-blade and crown eyelets. It uses stainless steel hardware and has the characteristic durability, versatility, and repairability all Surly products are known for. The 8-Pack Rack has lots of barrel braze-ons, so you can customize your cargo tie-downs…or just bolt on as many lights as you can possibly find. It’s rated to carry up to 30lbs (13.6 kg) and comes in black or silver.
Surly Big Dummy Rail Collars
$33.50
Surly's Dummy Rail Collars are nothing more than a simple clamping device that buttresses the connection between your Big Dummy Frame and the Dummy Rails. They increase the stiffness of the interface of these two parts and help keep your cargo from getting its salad tossed… unless of course your Dummy Bags are filled with tossed salad. These are designed specifically for use with the Big Dummy frame and Dummy rails, and will not work with Xtracycle rails. WARNING: Properly installed Dummy Rail Collars are required for carrying live cargo on your Big Dummy.
Surly Front Rack
$145.00
Surly Racks are well-thought-out, durable, expedition-worthy racks that work with most panniers. While their racks aren't limited solely to heavy duty touring, that is what they were designed for. When you're out on the road, the best option is to never ever have anything ever go wrong ever. Right? That's never a guarantee though; so having something that you can repair if it does break can be pretty clutch. Thus, the main bodies of Surly's front and rear racks are made from tubular CroMoly steel with stainless hardware. This means you can probably find someone out there that can torch it back into one piece in the rare instance things go south. The Front Rack is height adjustable and provides either a low or high pannier mounting position, which can be handy depending on terrain. When the ground gets rough, keep your gear high and dry. When the path is smooth and easy, you can load things low and keep everything balanced and stable, with the platform above the wheel providing yet more space for more stuff. It's worth mentioning they've redesigned the Front Rack hardware to be simpler to attach and more compatible with things like disc calipers and fenders. Surly also made attachment plates specifically for their Uni-Crown forks for yet more fork compatibility. This simpler design has fewer moving parts and costs less to manufacture; ergo, costs less for you to purchase. Surly's front rack WILL work with disc brakes on the Troll, Ogre, and Disc Trucker frames. It may take a bit of work to get clearance around the front caliper since the many different calipers out there are many different shapes. The new attachment plates will limit any DIY ingenuity you might need, but if you need to throw a washer or three behind the lower left bolt where the plate attaches to the fork dropout, that's not a big deal. As part of Surly's ongoing effort to make this planet last a little longer, they recently started shipping their racks with a small, reusable Surly Tool Bag that houses the rack struts and hardware. This switch helps eliminate the use of some polybags, thereby minimizing excess waste. Plus, you get a free tool bag out of the deal. Surly Front Rack will haul up to 32kg (70 lb) of well-secured, well-balanced gear over roadways and maintained off-road trails. Front Rack specifications: - Tubing diameter: 10mm - Platform dimensions: 230 x 170mm - Weight: 1382g
Surly Moloko Handlebar Bag
$68.00
The Moloko Adjunct Personal Effects Receptacle is made from urethane-coated nylon canvas and designed to fit in the center of the Surly Moloko Bar. It has space for essentials and can easily be accessed while riding. - Constructed from urethane-coated nylon canvas to provide water-resistant protection - Elastic cord on top snuggly secures extraneous loose items like wrappers or gloves - Integrated light port allows a battery cord to pass through - Dimensions: 254 x 90 x 90mm
Surly Mountain Frame Bag
$188.00
Surly mountain frame bags are designed specifically to fit in the main triangle of your Surly frame. Their mountain bags are now using a ladder strap system, which allows greater flexibility in how you attach the bag to your frame. The ladder straps let you customize the fit and placement of the mounting straps so if you have some weird contraption clamped to your frame tubes like a chain keeper, cable pulley or some trinket grandma gave you, you know it won't interfere with the mounting straps on the frame bag. Handmade by Revelate Designs in the U.S., these things are made of Dimension Polyant VX 42, a synthetic sailcloth. This stuff is durable, rip resistant, and tightly woven and laminated to make it highly water resistant (but not fully waterproof… Revelate advises using drybags inside if you risk riding in extended downpours or underwater). Compartment access is controlled by quality YKK brand water resistant zippers. The large main compartment has a flexible divider inside, and there's a hidden pocket too. There's also a compartment suitable for smaller items you''ll access relatively often, like your map, phone, hard boiled eggs, uncontained pudding, marbles for playing marbles, your dugout, that ring you found that makes you disappear when you put it on, or whathaveyou. Frame bags such as this are becoming more and more popular. They're light, reasonably voluminous, stable because they center weight low between your wheels and body, and they go places where racks and panniers are often troublesome, like singletrack. Surly offers them in ten sizes for many of their off-road frames. Buy the bag that matches the size of your frame based on the handy sizing chart. Note: due to the rough texture of the mounting straps, prolonged use may lead to scratched or worn paint. Those worried about keeping their frame looking pristine should immediately look for some other type of bag, or figure a way to protect their paint, such as duct tape. Or tatting a top tube doily. For example.
Surly Rack (Rear)
$155.00
This expedition-worthy rack is made from 4130 chromoly, so it's tough, light and easily repairable in the field. It's also height-adjustable, so you can get your center of gravity as low as possible for a stable ride. The provided stainless steel hardware enables you to attach your rack to virtually any frame with 26-inch, 700c and 29-inch wheels. And, it hauls up to 80 pounds of gear and is powder-coated to protect it from the elements.
Surly Rear Disc Rack
$160.00
Surly's burly line of tubular chromoly steel racks have been used on expeditions all over this planet for years.This Surly Rear Disc Rack is made of tubular chromoly steel and is specifically designed to fit frames with seatstay-mounted disc brakes like the Straggler (650B and 700c), Krampus, and Karate Monkey. - Tubular chromoly rack, stainless-steel hardware - Height-adjustable to accommodate 26-29" wheels - Hardware housed in reusable Surly Tool Bag
Soma Soma Rakku Rear Rack Alloy
$99.99
A premier Aluminum rear rack. Its platform is set slightly more behind the wheel axle than similar sized racks. So it is a good choice for frames with chainstay lengths less than 430mm, which cyclists sometimes have heel clearance problems with panniers bags. So if you commute or tour with a CX bike, road bike, mountain bike and your feet kicks your bags while pedaling, give this a try.. - Black/silver aluminum - Dual level pannier mounting - 350 x 120mm platform - Eyelets on top makes it easy to tie a basket on the platform - Load: 25 kg - Wt: 775g (Aluminum)
Revelate Designs Mountain Feedbag
$55.00
The Mountain Feedbag is an on-the-go aid station for endurance riding. It offers ample food storage with fumble-free, one-handed access via an innovative drawcord system. Slightly larger than the previous version, you can now easily fit your beloved 1L Nalgene bottle, camera lenses, and more. It also features an additional outside pocket, leaving you with more space for wrappers, sunscreen, granola bars, and other small items. Mountain Feedbags also work well as bike-mounted lens cases for mirrorless camera systems. Features: - Super-fast, one-handed (really!) opening and closure with no fumbling to grab cord locks - Three external pockets for gels and trash - Three-layer construction: outer fabric, foam, and liner. Foam adds stiffness and insulates. - Bright yellow interior liner snaps in place and is easily flipped for cleaning - Mounts to either side of stem with adjustable attachment points - run two for tons of storage - Easily used in combination with a Sweetroll or Harness handlebar system - Fits bike water bottles, Nalgene bottles, and bear spray cans - Weight: 3.7oz - Materials: Revelate exclusive VX 21 polyurethane coated X-pac; 420 denier yellow lining - Made in the USA with domestic and imported materials
Revelate Designs Revelate Designs Shrew Seat Bag
$59.00
The Shrew is built for big day rides on any terrain: gravel, singletrack, road, snow, whatever. The Shrew carries spare clothing and gear for the long haul with ease. It packs a mighty 3L capacity and weighs just just 4.5 ounces. Mounting only to the salddle rails gives the Shrew maximum versatility and a near universal fit to any bike. Compatible with any seat post—dropper, suspension, aero, or high setback seat posts are no problem, the Shrew fits them all! Scaled down from our larger seat bags, the shrew features independent rail straps with added hypalon wings that wrap the upper saddle rails. The attachment straps connect to a fiberglass stay stiffening the bottom of the bag for compression. This system gives the bag great stability in a small package. A roll top opening provides fast and simple access to your gear. Shrew Features Roll down closure allows bag to expand or compress in volume Revelate exclusive RevX-PAC panels that are 2 times as abrasion resistant as standard VX material. Indie-Rail attachment system provides maximum stability without added hardware. Fiberglass stay Carbon seatpost friendly Specifications Weight: 4.5 ounces Volume: 3L Materials: RevX-Pac Fabric: Dimension Polyant VX-21 with proprietary abrasion resistant finish.
Revelate Designs Sweetroll Bag
$115.00
Adjustable handlebar offset using stack-able spacers, provides room from cable and lever interference with zero abrasion against bag fabric. - 100% Waterproof - Four-point, Jones Loop Bar mounting (with separate kit) - Manta Flap - Shove stuff between the flap and the main bag - Features two rows of daisy chain webbing for custom configurations - Swap it out for a pocket for added capacity - Fiberglass cross stiffener adds rigidity to the mount area and provides structure when packing and unpacking - Fiddle free detach and mounting - Foam spacer block at head tube/crown attachment (bag does not make contact with the bike) - Dimensions: Small (5.75 diameter x 23-inch max width), Medium (7 x 22-inch max width), Large (8 x 22-inch max width) - Volume: Small (600 cubic inches), Medium (850 cubic inches), Large (1,100 cubic inches)
Revelate Designs Tangle Frame Bag
$95.00 - $105.00
The Legendary Tangle frame bag is the original half frame bag, it offers substantial cargo capacity in a sleek, rectangular shape that fills unused space on your bike. Designed to fit a variety of bike frames, these bags can be used for everyday riding, commuting, and adventuring. Stash your food, tools, and a mini pump and you're ready to go anywhere. Features: - Zipstretch construction - Pairs a bomber, wetsuit style molded-tooth zipper with Revelate's exclusive stretch Cordura panels that reduce zipper stress when closing bag - Exit port in main compartment for hydration tube or wires - Zippered left side pocket with dividers organizes small items - Urethane-coated webbing attachments won't absorb water or grit - Daisy chain front top tube attachment accommodates any top tube bag configuration - Padded with closed cell foam along all tube sections - Internal pump straps along top tube - Low-profile cam-lock buckles - Made in the USA with domestic and imported materials Sizing: - Small: top length 17.5", overall height 4" - Medium: top length 19.75", overall height 4.5" - Large: top length 21", overall height 6.5" To check that the Tangle leaves room for water bottle mounts, measure the vertical height from the bottle top to the bike’s top tube and compare to the the listed bag height. A little bit of overlap is ok, side-entrance water bottle cages are preferable. Specifications: - Materials: VX21 X-pac, 1050-denier domestic ballistics nylon, 420-denier diamond ripstop lining, closed cell foam padded tube sections
Revelate Designs Terrapin System 8L Seat Bag
$135.00 - $145.00
The Terrapin® 8L is a smaller version of the modular Terrapin® System. Like the popular Terrapin System, the mount stays on the bike and the custom fitted air purge drybag is removable for easy packing. With 8 liters of capacity, it is perfect for most lightweight bikepacking trips and fits bikes with low tire clearance. It is perfectly sized for small framed bikes, including plus bikes with inherently diminished clearance. The Indie-Rail attachment system, is a progression from conventional bikepacking bag mounts where the rail straps are fixed to the top center of the bag. With Indie-Rail, each saddle rail is cinched down hard to the sides of the bag, virtually eliminating side to side bag sway without the need for external hardware. We combine this with rigid internal structure and active camming buckles to prevent straps from slipping on rough terrain. The mount is stiffened on all sides including an external plastic bottom sheet which protects the bottom of the bag like a fender. A composite internal top sheet provides a solid and stable platform for the strap points and transmits the vertical load to the seatpost connection. Features: -Indie-Rail attachment system and active camming hardware -Super stable without added hardware. -Radio frequency welded drybag with air purge valve -Protective external plastic bottom frame sheet -Aluminum hardware at high stress points -Composite internal top frame sheet -Hypalon slots on drybag for rear light attachment -One way, low profile, air purge valve -Foam stiffened side panels with fiberglass compression stays -Carbon seatpost friendly -7" Minimum of tire clearance required from saddle rails Winner of the 2018 Bikepacking.com Gear of the Year Award!
Origin8 Rush Messenger Flat Rack Pack
$64.19
- Water-resistant messenger pack designed to work with Origin8 front flat racks - Removable bottom panel provides structure and offers a sturdy platform for stacking items - Features a dedicated U-lock pouch, and multiple pockets for pens and small items - Roll top closure with adjustable strap and buckle - Durable 600D Polyester construction with TPU inner liner for water-resistance - Bag volume: 3800 CI
MSW Ride and Repair Kit with Seatbag and Airlift Mini Pump
$54.99
The essential accessories that complement a new bike are key to having the best experience. MSW Ride & Repair Kits combine all those ride essentials into one convenient, money-saving package. Available in several configurations to meet the needs of different types of riding and different types of riders. - This Ride and Repair Kit provides everything needed to fix a punctured tire. The kit includes an eight-piece multi-tool, glueless tire patch kit, three tire levers, CO2 inflator & cartridges, and a seat bag to put it all in - 50 cubic inch seat bag with hook-and-loop mounting straps - Three MSW tire levers - Eight-piece flat-pack multi-tool with 2/3/4/5/6mm hex wrenches, T25 Torx, flathead & Philips screwdrivers - Glueless patch kit with six patches, sandpaper, instructions - AirLift mini frame pump with a large chamber, locking handle and carrying mount
MSW Ride and Repair Kit with Seatbag and CO2
$54.99
The essential accessories that complement a new bike are key to having the best experience. MSW Ride & Repair Kits combine all those ride essentials into one convenient, money-saving package. Available in several configurations to meet the needs of different types of riding and different types of riders. - This Ride and Repair Kit provides everything needed to fix a punctured tire. The kit includes an eight-piece multi-tool, glueless tire patch kit, three tire levers, CO2 inflator & cartridges, and a seat bag to put it all in - 50 cubic inch seat bag with hook-and-loop mounting straps - Three MSW tire levers - Eight-piece flat-pack multi-tool with 2/3/4/5/6mm hex wrenches, T25 Torx, flathead & Philips screwdrivers - Glueless patch kit with six patches, sandpaper, instructions - Windstream Push-On CO2 inflator head - Two 20g CO2 cartridges
Page 1 of 2 Next page