$80.00 - $99.99
TruVativ is proud to announce the TRUVATIV CoLab Series, a collection of bars specifically engineered to match the demands of each signature athlete's discipline and riding style — and to enhance each rider's cockpit interface. - Upsweep: 5° - Backsweep: 9° (760mm bars) - Backsweep: 7° (all other bars)
$80.00 - $85.00
The Cheater Bar is built from triple butted 4130 CroMoly steel and is tough enough to handle all of the abuse you will inflict upon it on the trail. Surly made two versions: a clear coated raw steel version and a black ED coated version. Both are CroMoly steel. - Material: Cromoly steel - Clamp diameter: 31.8mm - Width: 780mm - Rise: 0mm - Sweep Angle: 11 degrees - Color: Clear Coat Silver and E.D. coated Black - Weight: 400g
In today’s fast-paced world of riseless flat bars and far-too-aggressive-for-our-liking cockpits, Surly harkens back to simpler times. They wanted a handlebar that would suffice for a relaxed cruise to a favorite windowless bar, but would also be suitable should a person decide to take the long way home. The Sunrise Bar is a cruiser bar, a trail bar, and a BMX bar all rolled into one. It has a 22.2mm clamp diameter, but Surly included some Problem Solvers shims so you can mount it up to your fancy 31.8mm stem. Material: CroMoly steel Clamp diameter: 22.2mm; Includes shims for 31.8mm clamp Width: 820mm; Can be cut to 720mm Rise: 83mm Sweep Angle: 14.7 degree backsweep, 6.7 degree upsweep Weight: 778g including shims Color: Black
The Terminal Bar blends cruiser-style comfort with off-road touring performance. Able to run with a 40mm drop or rise, its swept-back design makes it great for long rides on rough, technical terrain. - 22.2mm diameter grip area; good to go for MTB shifters, brake levers, and grips - 34 degree backsweep with a 40mm + / - rise
$84.95 - $86.95
- High strength 7 series Aluminium Alloy - Shot peened for increased fatigue life - Corrosion and abrasion resistant hard anodized finish - Laser etched positioning grid for easy set up - Width marks allow personalized fit adjustment - Permanent Graphics
$164.95 - $168.95
- The FatBar Carbon is the ultimate DH race handlebar. - This ride-tuned handlebar combines the ultimate blend of strength, stiffness and shock absorption.
- The second version of the Fatbar has undergone a full structural re-design. - In keeping with the demand for wider, gravity oriented handlebars, the width increased to 800mm. - Proven high grade 7050 T6 aluminium and variable gauge taperwall construction
Race Face's Chester bar is made of tough 6061 alloy with the perfect width, sweep and rise to be at home on both your DH and hardtail rigs. These bars will last long after your bones, bruises and scrapes heal up and you’re ready to tackle that gap jump that has had your number. Features - Manufactured from cold drawn, seamless 6061 Alloy. - Butted for an optimal strength to weight ratio. - Wider construction & re-designed taper offers - 740mm wide - 9° rearward, 6° upward
An exceptionally strong carbon fiber 35mm riser bar that’s built to descend. The M7 bar is designed for the most aggressive and demanding riders. Carbon fiber is the ideal material for a gravity bar because fiber orientation and bar shape can be controlled independently and developed in unison, resulting in a tuned flex profile that cannot be achieved with aluminum. This bar is tuned to be precise and responsive while absorbing fatigue-inducing chatter and taking the sting out of the biggest hits. The M7 bar features a trail-perfect 8-degree backsweep and 4-degree upsweep for your long-travel 29er, enduro race bike, or downhill machine. - Material: Carbon - Weight: 230g (10mm rise); 240g (25mm rise); 245g (40mm rise) - Bar Width (Max): 800mm - Bar Width (Min): 780mm - Clamp Diameter: 35mm - Backsweep: 8 Degrees - Upsweep: 4 Degrees - Torque Spec: Face Plate: 5.5Nm - Torque Spec: Controls: 5.5Nm
The handlebar of choice for the Scott / Velosolutions and Norco Factory Racing World Cup teams, the BLACKLABEL 800 is the evolution of over a decade of DEITY handlebar development. By widening the center bore area, we could increase strength while still delivering an incredibly comfortable, stable, and responsive feel that is unmatched. This premium race good is built for championships! - 800mm width - Designed for DH / Enduro / All MTN applications - Dirt Mag Top 100 Product - 4 years running for 2014, 2015, 2016, and 2018 - Incredibly detailed two-tone bead blast and polished ano finish - 9-degree bend / backsweep by 5-degree upsweep - Custom butted 7075 T73 aluminum utilizing our proprietary Gradient Butting Technology - Designed for maximum ride quality with a 31.8mm bore - World Cup DH / Redbull Rampage / Crankworx and FMB World Tour proven - The handlebar of choice for the Scott / Velosolutions and Norco Factory Racing World Cup teams - Features measured cut marks and center alignment detail - Covered by our Lifetime Crash Replacement Policy to the original owner - 15mm rise: 333g - 25mm rise: 342g - 38mm rise: 343g
- All new DJ/ Slopestyle premier handlebar designed for progression - 760mm wide - Featuring our Exclusive Gradient Butting technology - 31.8mm center bore - Full bead blast finish for increased durability and fatigue resistance - 9 degree bend / backsweep and 5 degree upsweep for ultimate comfort - Available in black ano finish with color graphic options - Covered by our Lifetime Crash Replacement Policy to the original owner - 50mm: 323g - 80mm: 334g
The all-new Racepoint Aluminum DH Handlebar was made with our proprietary Gradient Butting Technology, which allows us to put material where we need it and nowhere we don't. This makes for a significantly stronger handlebar at a similar weight to our competitors. We are 100% confident our new 35mm bore Racepoint DH Handlebar demolishes the competition with an 810mm width in both 25mm and 38mm rise options. You simply won't find a more refined handlebar option with this level of detail, durability, and performance. - Oversized 35mm Bore Aluminum Handlebar - Designed for Downhill / Enduro / All Mountain - Incredibly detailed two tone bead blast and polish ano finish - Custom butted 7075 T73 aluminum utilizing our proprietary Gradient Butting Technology - 810mm wide - 9 degree bend x 5 degree upsweep - Flex and deflection characteristics designed to match the Blacklabel handlebar - Features measured cut marks and center alignment detail - Black ano finish with colored graphics - Covered by our Lifetime Crash Replacement Policy to the original owner - 25mm rise: 327 grams - 38mm rise: 330 grams
DEITY's expanded aluminum handlebar line now includes the SKYLINE 787 All MTN / Enduro / Trail handlebar. We've taken all of our experience in developing the strongest handlebars and implemented a featherweight version to bring DEITY to the top of the mountain! Utilizing our trade-secret Gradient Butting Technology, while investing the time and cost to properly heat-treat each handlebar model individually, we are able to deliver the lightest premium DEITY aluminum handlebar in the line. Most manufacturers don't take the time or absorb the cost to heat treat a single production handlebar model separately from other models. Nevertheless, the resulting 20% increase in strength in all of our aluminum handlebars is just one of the many reasons we go the extra mile at any cost to allow you to climb – descend – repeat! - The DEITY All MTN / Enduro / Trail handlebar - 787mm wide - The SKYLINE handlebar is our lightest aluminum bar - Ultra-sleek two-tone bead blasted and polished ano finish for incredible detailing and durability - Custom Gradient Butted 7075 T73 aluminum - Featuring a 31.8mm bore for lightweight performance and strength - Features measured cut marks and center alignment detail - 9 degree bend / backsweep by 5 degree upsweep - Black ano finish with color graphics - Covered by our Lifetime Crash Replacement Policy to the original owner Sizes: - 15mm (290gm) - 25mm (296gm)
After years of research and development dedicated to perfecting the 35mm bore handlebar, DEITY has created the best-feeling carbon line of handlebars to date. Gone are the days of blown-out hands and varying degrees of arm pump after a day on your new 35mm bore oversized super-stiff handlebar. Our all-new Skywire Carbon Trail handlebar delivers the same level of strength and comfort you've come to expect from DEITY with a very specific focus on increased performance and time on the bike. Perfectly spec'd at 800mm wide with 15mm and 25mm rise options, this beauty promises to keep you on the bike longer with a shorter recovery between rides. - Oversized 35mm Bore Carbon Handlebar - Designed for Enduro / All Mountain / Trail - Developed and designed exclusively with our own in house DEITY molds - Unidirectional Carbon Construction - Damping properties reduce hand fatigue - 800mm Width - 9 degree bend x 5 degree upsweep - The ultimate combination of strength, weight, and ride quality - Textured non slip stem clamping surface - Textured grip ends for added bite - Covered by our Lifetime Crash Replacement Policy to the original owner - Recommended MAX Torque Spec range (4 - 4.5 Nm) - 15mm rise: 222 grams - 25mm rise: 226 grams
DEITY's all-new Topside aluminum handlebar utilizes the unique properties of 2014 grade T73 aluminum coupled with DEITY's proprietary Gradient Butting Technology. This high-performance mountain bike handlebar not only looks amazing, but outperforms many of the most expensive bars on the market in both feel and strength. Designed with DEITY's classic 9-degree backsweep and 5-degree upsweep, the Topside handlebar delivers a 35mm center bore with a wide 800mm stance and 25mm rise for the perfect balance between rider set up and rider experience. - Oversized 35mm Bore Aluminum Handlebar - Affordable option to upgrade your OEM handlebar - Designed for DH / Enduro / All Mountain - Bead Blast finish with contrast graphics to match the latest gear - Custom butted 2014 T73 aluminum utilizing our proprietary Gradient Butting Technology - 800mm wide - 25mm Rise - 9 degree bend x 5 degree upsweep - Features measured cut marks and center alignment detail - Black ano finish with colored graphics - Covered by our Lifetime Crash Replacement Policy to the original owner - Weight: 350 grams
The No.9 35.0 Mountain Carbon Handlebar is designed and built for the most extreme trail and all-mountain riding. The oversized stem clamp adds to front-end stiffness for precise input, while the carbon construction provides vibration damping in a lightweight and durable package. - Unidirectional carbon fiber construction - 35mm stem clamp - 8 degrees of backsweep with 5 degrees of upsweep - Trimmable ends, made easy with graphic markings - Rated to ASTM Condition 4 for extreme off-road riding
Occupying a class all its own, our Winston Handlebar is a performance carbon mustache bar loaded with versatility and flare. Featuring a 25mm rise and 73-degree backsweep, it offers compatibility with road, mountain, and bar-end controls. Pretty enough to punch up commuter rigs and sport touring bikes alike, it's built tough to handle everything from rough, off-road conditions to long rides in the country. Comfortable in both the drop and riser positions, the unique and multi-functional Winston is sure to inspire upgrades and eye-catching custom builds. - Compatible with road, mountain, and bar-end controls - Tested to ASTM 3 - 90mm clamping area to fit Salsa Anything Cradle - Can be ridden in up or down position - Unidirectional carbon fiber construction - Weight: 250g
Combine a proven shape, proven width, proven materials and a take-no-prisoners approach, and you’ve got the new Carbon 7050 Descendant riser bars. They are stiff, tough, dependable, and give you all the comfort and positive steering feel you could want. Descendant series bars are the new normal for comfort and control. - Material: Al-7050 - Width: 760mm - Backsweep: 7-degrees - Rise: 20mm - Upsweep: 5-degrees - Colors: Black
TruVativ's burly Holzfeller Riserbar is made from butted 7050 aluminum to take gravity-fueled abuse like a champ. This 730mm-wide bar gives you awesome leverage to muscle your rig and the rise gives you an upright position for greater control in nasty rock gardens as well as increased confidence on steep descents.
TruVativ's tough Hussefelt Comp Riserbar is made from butted aluminum for a long fatigue life and great strength. The wide bar and high rise gives you an upright position for greater control in technical sections and confidence on steep descents.
TruVativ's super-tough Hussefelt Riserbar is made from triple-butted AL-66 for a long fatigue life and great strength. The wide bar and high rise gives you an upright position for greater control in technical sections and confidence on steep descents.
TruVativ's Stylo T20 Flatbar is made from butted aluminum for low weight and high strength. At 600mm wide, it gives you a nice XC width without weighing you down. A subtle sweep gives your hands the perfect position for greater control in technical sections.
TruVativ's Stylo T20 Riderbar is crafted from butted aluminum for low weight and high strength. At 680mm wide, it gives you enough leverage to muscle your rig without weighing you down. A subtle sweep gives your hands the perfect position for greater control in technical sections.
TruVativ's Stylo T30 Riserbar will have you taking on climbs and descents like a champ. This butted aluminum bar is 700mm wide, to give you enough leverage to muscle your rig without weighing you down. And, the multiple rise options let you choose the perfect upright position for greater control in technical sections.
World Cup quality performance, developed with the pros. SPANK Industries' legendary SPIKE 800 Race handlebar is the 5th generation of the SPIKE Race handlebar legacy, developed in coordination with some of the world’s top DH and Enduro pros. A unique construction of Super 6 alloy, processed with SPANK’s patented CNC bending and Dual-Extreme-Gradual Taper (XGT) technology makes the SPIKE 800 Race handlebar a stronger, safer, performance-optimized component for the weight-conscious gravity rider. The race-tuned geometry and competitive weight make this bar the perfect solution for AM/Enduro to Downhill Race. SPANK's SPIKE 800 Race is the handlebar of choice for Nicholi Rogatkin, Thomas Genon, Tomas Zejda and many more. - Key technologies: Dual XGT, CNC Bending, Impact Ends, MGR, Super 6 Alloy - Material: MGR Super Six Alloy - Weight: ±300g (5mm) / ±310g (15mm) / ±320g (30mm) / ±330g (50mm) - Diameter: 31.8mm - Rise: 5mm / 15mm / 30mm / 50mm - Length: 800mm (Adjustable to 740mm) - Geometry: 4° up x 8° back - Finish: Shotpeen anodized, decal logos
- Freeride inspired all mountain suitable geometry makes the bar extremely versatile - Rock solid in the park or on the trail - Cost effective upgrade to your cockpit without sacrificing quality - Shot-peening and anodizing enhances fatigue life even further - Material: Alloy - Weight (g): ±395 (25mm) / ±400 (40mm) / ±420 (60mm) - Diameter (mm): 31.8 - Rise (mm):25 / 40 / 60 - Length (mm): 785 - Geometry (Degree): 5°up x 8°back (25mm) / 5°up x 9°back (40mm) / 4°up x 10°back (60mm) - Finish: Shotpeen anodized, laser logos
The industry’s first all-in-one premium youth components upgrade kit, which is ergonomically optimized to enhance performance and ultimate control. - Includes Slater 90 pedals, Slater 650 bar, Slater Jr. grips, and a Fly Jr. saddle - Includes light plastic 22.2 to 19mm shims, located inside the packaging with the instruction manual - Age: Youth - Rail Material: Steel - Clamp Style: Standard Rails - Material: Synthetic - Length: 235mm - Width: 122mm - Weight: 270g
The standard for which Ritchey performance is based on. Race-worthy components priced for the casual cyclist. - Double butted 6061 alloy construction - Gentle sweep for ergonomic performance - Bar Clamp Diameter: 31.8mm - Rise: 5mm - Weight: 276g
The standard for which Ritchey performance is based on. Race-worthy components priced for the casual cyclist. - Gentle sweep for ergonomic performance - Bar Clamp Diameter: 31.8mm - Width: 740mm - Back Sweep: 9 degrees - Weight: 380g - Material: Alloy
With a classic 25.4mm clamp diameter, the extra-tall 30mm of rise gives way to comfort and added control for an economic option for any classic mountain bike build. - Material: 6061 alloy - Width: 670mm - Rise: 30mm - Backsweep: 9° - Upsweep: 2° - Clamp diameter: 25.4mm - Bar-end compatible: yes - Weight: 399g
Page 1 of 2 Next page