Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Accessories/Parts
$12.99
CycleOps' Trainer Skewer ensures your trainer will hold your rear wheel in place. Made of heavy-duty stainless steel, it will provide years of reliable use and keeps your high-end skewers pristine.
$63.95
Going tubeless allows you to run low tire pressure for better traction while drastically reducing the chances of a flat. Stan's Standard Tubeless Kit converts standard tubed wheels to tubeless so you can reap the benefits. Everything you need to go tubeless is included. Plus, you won't miss dealing with flat tires and you'll save money on tubes!
$22.50
Stan's Cyclocross Rim Strip converts standard tubed wheels to tubeless so you can reap the benefits. Going tubeless allows you to run low tire pressure for better traction while drastically reducing the chances of a flat. Stan's rim strips create a tight seal with the tire bead, reducing the instances of "burping". Plus, you won't miss dealing with flat tires and you'll save money on tubes!
$22.50
Stan's Enduro Rim Strip converts standard tubed wheels to tubeless so you can reap the benefits. Going tubeless allows you to run low tire pressure for better traction while drastically reducing the chances of a flat. Stan's rim strips create a tight seal with the tire bead, reducing the instances of "burping". Plus, you won't miss dealing with flat tires and you'll save money on tubes!
$68.95
Going tubeless allows you to run low tire pressure for better traction while drastically reducing the chances of a flat. Stan's All Mountain 29er Tubeless Kit converts standard tubed wheels to tubeless so you can reap the benefits. Everything you need to go tubeless is included. Plus, you won't miss dealing with flat tires and you'll save money on tubes!
$10.00
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life.
- Fits: JoyTech 9.5mm x 26, rear alloy, steel front hubs
- Compatible with 9.5mm x 26tpi axle
- Cone Wrench Size: 15mm
- Threads: 9.5mm x 26
- Diameter: 17.0mm
- Length: 13.8mm
- 1 cone per bag
COMPATIBLE HUBS:
- Fits: JoyTech 9.5mm x 26, rear alloy, steel front hubs
- Taiwanese hubs with 9.5mm x 26tpi axle
$10.00
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life.
- Fits: JoyTech, Sovos, KK, KT 9.5mm x 26tpi
- Compatible with 9.5mm x 26tpi axle
- Cone Wrench Size: 13mm
- Threads: 9.5mm x 26
- Diameter: 15.0mm
- Length: 12.8mm
- 1 cone per bag
COMPATIBLE HUBS:
- JoyTech, Sovos, KK, KT 9.5mm x 26tpi
- Taiwanese hubs with 9.5mm x 26tpi axle
$10.00
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life.
- Compatible with Shimano Rear 10mm x 1 axle
- Rear Left Cone
- Cone Wrench Size: 15mm
- Threads: 10mm x 1
- Diameter: 16.9mm
- Length: 15mm
- 1 cone per bag
- Note: O-ring / seal not included. Check the seal groove closely. This cone has a wider groove than cone CN-R024.
COMPATIBLE HUBS:
- Ultegra 6401 7-speed Rear
- Ultegra 6402 8-speed Rear
- 105 SC 1055 8-speed Rear
- 105 SC 1056 7-speed Rear
- XT-II M732 7-speed Rear
$10.00
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life.
- Fits: JoyTech, Joy U, KK 9mm x 1, front hub
- Compatible with 9mm x 1 axle
- Cone Wrench Size: 15mm
- Threads: 9mm x 1
- Diameter: 15.0mm
- Length: 12.8mm
- 1 cone per bag
- Note: O-ring / seal not included.
COMPATIBLE HUBS:
- JoyTech, Joy U, KK 9mm x 1, front hub
- Taiwanese front hubs with 9mm x 1 axle
$10.00
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life.
- Fits: Joytech 9mm x 26, front hub
- Compatible with 9mm x 26 axle
- Cone Wrench Size: 13mm
- Threads: 9mm x 26
- Diameter: 15.0mm
- Length: 12.8mm
- 1 cone per bag
- Note: O-ring / seal not included.
COMPATIBLE HUBS:
- Joytech 9mm x 26, front hub
- Taiwanese hubs with 9mm x 26 axle
- 105 SC 1055 8-speed Rear
- 105 SC 1056 7-speed Rear
- XT-II M732 7-speed Rear
$10.00
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life.
- Fits: JoyTech 10mm x 26, rear hub
- Compatible with 10mm x 26 axle
- Cone Wrench Size: 15mm
- Threads: 10mm x 26
- Diameter: 17.0mm
- Length: 13.8mm
- Note: O-ring / seal not included.
- 1 cone per bag
COMPATIBLE HUBS:
- JoyTech 10mm x 26, rear hub
- Taiwanese hubs with 10mm x 26 axle
$10.00
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life.
- Fits: JoyTech 9mm x 1, front "parallax" style hub
- Compatible with 9mm x 1 axle
- Cone Wrench Size: 13mm
- Threads: 9mm x 1
- Diameter: 15.0mm
- Length: 11.0mm
- 1 cone per bag
COMPATIBLE HUBS:
- JoyTech 9mm x 1, front "parallax" style hub
- Taiwanese hubs with 9mm x 1 axle
$10.00
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life.
- Compatible with Shimano Front 9mm x 1 axle
- Cone Wrench Size: 13mm
- Threads: 9mm x 1
- Diameter: 15.0mm
- Length: 12.7mm
- 1 cone per bag
- Note: O-ring / seal not included.
COMPATIBLE HUBS:
- Ultegra 6400 Front
- Shimano 105 HB-5500 Front
- Shimano 105 HB-5501 Front
- 105 SC 6400 Front
$10.00
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life.
- Compatible with Shimano Rear 10mm x 1 axle
- Shimano Left Rear Cone
- Cone Wrench Size: 15mm
- Threads: 10mm x 1
- Cone Diameter: 17.0mm
- Dust Seal Diameter: 25.5mm
- Length: 16.0mm
- 1 cone per bag
COMPATIBLE HUBS:
- XT M750, 9-spd Rear
- XT M760, 9-spd Rear
- XT M765, 9-spd Rear
- Deore LX M570, 9-spd Rear
$10.00
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life.
- Compatible with Shimano Rear 10mm x 1 axle
- Shimano Right Rear Cone
- Cone Wrench Size: 15mm
- Threads: 10mm x 1
- Diameter: 17.0mm
- Length: 9.0mm
- 1 cone per bag
COMPATIBLE HUBS:
- XT M750, 9-spd Rear
- XT M760, 9-spd Rear
- XT M765, 9-spd Rear
- Deore LX M570, 9-spd Rear
$10.00
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life.
- Compatible with Shimano Front 9mm x 1 axle
- Cone Wrench Size: 13mm
- Threads: 9mm x 1
- Cone Diameter: 15.0mm
- Dust Seal Diameter: 22mm
- Length: 12.7mm
- 1 cone per bag
COMPATIBLE HUBS:
- Shimano Deore LX HB-M570 Front
- Shimano Deore XT HB-M750 Front
$10.00
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life.
- Compatible with Shimano Rear 10mm x 1 axle
- Shimano Rear Cone
- Cone Wrench Size: 15mm
- Threads: 10mm x 1
- Diameter: 16.9mm
- Length: 15mm
- 1 cone per bag
Note: O-ring / seal not included. Check the seal groove closely. This cone has a narrower groove than cone CN-R002.
COMPATIBLE HUBS:
- 105 FH-5700, 9 speed (right side cone)
- 105 SC 1051, 7 Speed Rear
- RX100 A551, 8 Speed Rear
- RSX 410, 7 Speed Rear
- Deore LX M550, 7 Speed Rear
- Deore Mtn LX M550, 7 Speed Rear
$10.00
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life.
- Compatible with Shimano Rear 10mm x 1 axle
- Shimano Rear Right Cone
- Threads: 10mm x 1
- Diameter: 16.9mm
- Length: 12.5mm
- Cone Wrench Size: 15mm
- 1 cone per bag
COMPATIBLE HUBS:
- Sora FH-3300, 9-spd Rear
$20.90
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts.
- Fits many Shimano / Japanese rear hubs with 130mm spacing
- Type: Hollow Axle
- Threads: 10mm x 1
- Diameter: 10mm
- Length: 141mm
- 1 axle per bag
$19.25
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts.
- Fits many Shimano / Japanese rear hubs with 135mm spacing
- Type: Hollow Axle
- Threads: 10mm x 1
- Diameter: 10mm
- Length: 146mm
- 1 axle per bag
$15.65
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts.
- Fits many Shimano / Japanese rear hubs
- Type: Solid Axle
- Threads: 10mm x 1
- Diameter: 10mm
- Length: 174mm
- 1 axle per bag
$25.30
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts.
- Fits Campagnolo / Italian rear hubs with 130mm spacing
- Type: Hollow Axle
- Threads: 10mm x 26tpi
- Diameter: 10mm
- Length: 141mm
- 1 axle per bag
$25.30
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts.
- Fits Campagnolo / Italian rear hubs with 135mm spacing
- Type: Hollow Axle
- Threads: 10mm x 26tpi
- Diameter: 10mm
- Length: 146mm
- 1 axle per bag
$23.10
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts.
- Fits many Taiwanese hubs with 126mm spacing
- Type: Hollow Axle
- Threads: 9.5mm x 26tpi
- Diameter: 9.5mm
- Length: 137mm
- 1 axle per bag
$23.10
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts.
- Fits many Taiwanese hubs with 130mm spacing
- Type: Hollow Axle
- Threads: 9.5mm x 26tpi
- Diameter: 9.5mm
- Length: 141mm
- 1 axle per bag
$10.00
Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life.
- Compatible with Shimano Front 9mm x 1 axle
- Cone Wrench Size: 13mm
- Threads: 9mm x 1
- Diameter: 14.8mm
- Length: 10.5mm
- 1 cone per bag
- Note: O-ring / seal not included.
COMPATIBLE HUBS:
- Road 400 CX Front
- HB-RM40 Front
- Shimano HB-RM40 Front
- HB-RA50 Front
$23.10
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts.
- Fits many Taiwanese hubs with 135mm spacing
- Type: Hollow Axle
- Threads: 9.5mm x 26tpi
- Diameter: 9.5mm
- Length: 146mm
- 1 axle per bag
$15.65
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts.
- Fits many Shimano / Japanese front hubs
- Type: Solid Axle
- Threads: 9mm x 1
- Diameter: 9mm
- Length: 155mm
- 1 axle per bag
$19.80
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts.
- Fits many Shimano / Japanese front hubs
- Type: Hollow Axle
- Threads: 9mm x 1
- Diameter: 9mm
- Length: 110mm
- 1 axle per bag
$33.00
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts.
- Fits Campagnolo / Italian rear hubs
- Type: Solid Axle
- Threads: 10mm x 26tpi
- Diameter: 10mm
- Length: 174mm
- 1 axle per bag
Page 1 of 6
Next page